[Beowulf] Building a 2 node cluster using mpich

[Jim Lux]

Quoting Kalpana Kanthasamy <kalpana0611 at gmail.com>, on Thu 27 Dec 2007  
09:33:49 AM PST:

>
> 3.Cluster is private. I have used IP address 192.168.0.190 for the
> master node and 192.168.0.191 for the slave node.

I prefer to avoid any .zero addresses... 192.168.1.190 would be my choice..
Just because a lot of consumer equipment uses the 192.168.1.x range by  
default (e.g. that firewall, wireless access point, etc.)


Although, looking over some notes, I see I use 10.0.0.x a lot, too.



Jim Lux